Thread: Definately a scrapyard challenge
Hybrid View
-
04-01-2012 #1
Bruce i apologies for tramping your thread but things like this puts doubt in new comers minds and they then abandon their projects because it gets too expensive. Advice on your Z though is definitely not go for 1610 screw enless you are using high powered steppers. The greater the thread angle the easier it is for the stepper to not be able take the weight. Please do not ignore Jonathan's advice as he has a lot of experience learned first hand. Just stick to your budget and if it is not enough for what you really need then save rather than waste it on buying the first thing that comes along.
A great effort on your build so farIf the nagging gets really bad......Get a bigger shed:naughty:
-
04-01-2012 #2
Hey I enjoy seeing people put their theorise to the test. I have a budget but I also like do the best I can. As I already have the screws then thats fine. The upgrade to a water cooled spindle was good advice and still stays , just, in budget. If I cannot afford it then as you say I will save. Biggest problem is deciding in what order to buy stuff.
I will do a sketchup of my gantry redesign and get some coments. probably at the weekend.
Thanks again
Bruce
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Scrap Heap Challenge
By TrickyCNC in forum DIY Router Build LogsReplies: 38Last Post: 16-09-2012, 07:52 AM -
NEW MEMBER: Up for a challenge......
By swatt in forum New Member IntroductionsReplies: 1Last Post: 03-10-2010, 10:57 PM -
Fancy a challenge?
By cassius in forum Machine DiscussionReplies: 5Last Post: 03-09-2010, 02:44 PM
Bookmarks