Quote Originally Posted by motoxy View Post
If all the limit switches are connected in series would it make sense to mount them all on this gantry as this would mean only one cable going from the gantry to the control box?
Yes With a bit of care and planning it's possible to use just 1 switch for each axis all wired in series. Doing it this way then yes it's possible to mount them all on the gantry.
Basicly you need some kind of ramp or bracket either end of each axis to trip the switches.

Confession time now bruce I forgot to do what I've got to do.!!! . . . Will do it ASAP promise. .