Cannot believe its been 3 weeks!! Today I decided to swap over the ballscrews but leave everything else as is. The binding sound now comes from the other side and yes I think I know the problem. You may remember that I thought it was a good idea to take a ballscrew apart and see how they worked. I think that I may have not found all the balls and that this is the cause of the problem. So I shall have to get another ballnut and try again.

Water pipes are connected and basically just limit switches to fit.

I have fitted a drag chain on the x axis and I am getting another for the y axis. Some bracketry for that and we are almost ready.

Bruce