. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 13-01-2012 #6
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Personally I'd strip it out and replace with modern drives, Bob etc and control software like Mach3 or EMC.!

    The time spent chasing how to get this working could be better spent cutting returning your investment quicker. . . . . Probably perform better as well with modern drives.?

    Edit: What model router is it.? . . . . . These educational routers are full of safety feature interlocks etc and it could easily be one of these that's faulty and locking you out.?
    I'd check out all safety switch's limit's, estop's, cabinet door switch's etc or for quicky elimination purpose's even look to tempory by-pass them. . . . Often it's the little things that shut the whole job down.!!
    Last edited by JAZZCNC; 13-01-2012 at 05:47 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Looking for a copy of Burny/ITT WinAMC software for an AMC4 controllor/laser cutter
    By whereditgo in forum Machine Control Software
    Replies: 8
    Last Post: 27-10-2018, 10:29 AM
  2. DSP controller questions, Will this work well with Deskproto as my CAM software?
    By chris in forum DeskProto
    Replies: 7
    Last Post: 18-01-2014, 07:04 AM
  3. FOR SALE: SuperPID v2 (Closed-loop PID Router Speed Controller)
    By Mad Professor in forum Items For Sale
    Replies: 18
    Last Post: 23-04-2013, 10:48 AM
  4. elu cnc 860 router software help
    By willie walker in forum Machine Control Software
    Replies: 0
    Last Post: 16-04-2013, 08:07 PM
  5. Reversed axis on a AXYZ 6010 after installing DNC controller software...
    By RickyThunders in forum Machine Control Software
    Replies: 1
    Last Post: 12-02-2013, 03:56 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules