Thread: calibration
Threaded View
-
24-01-2012 #1
Hello all
I have a small issue with my y-axis and would assume the same with my z-axis as they are both on pulleys
the issue I have is calibration
this only came to light when I tried to cut my dragon out on Sunday night when I tried to cut a distance on my y-axis off 300 mm as that was the size of my model and when I measured it it was 286 mm. at first I thought it was the model software and the scale factor, so I set my spindle to cut at 286 mm and to my surprise my spindle came up short.
well today I have set it to cut/drill three hole in a triangle of 100 mm and it's cut it out at around 95 mm
how do I recalibrate my CNC Machine Mach3 is the software I'm using
James:exclaim::exclaim::exclaim:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Calibration issues, advice needed
By Kernow Jim in forum Motor Drivers & ControllersReplies: 16Last Post: 23-01-2014, 07:18 PM -
Problem with calibration
By m.marino in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 22-04-2010, 04:19 PM -
Chronoscope Calibration Tool
By Robin Hewitt in forum General ElectronicsReplies: 1Last Post: 29-11-2008, 01:26 AM
Bookmarks