Thread: Sieg Super X3
-
25-10-2008 #1
I just took the plunge and got me a Super X3 mill.
I will be converting it to CNC later on, but just wanted to get started and will be making Nema 23 and 34 mounts to start with.
I have also ordered a 58 peice clamping kit
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=360086175168
and a ER40 collet set
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=320201174031
and i am investigating the milling cutters, so any advise on what to buy and what not to buy would be useful?
What else do you suggest i get apart for milling for dummies :)
Also any suggestions on the cnc conversion would be great, I have all the parts to convert it, but if anyone has experience in converting this machine it would be great if you could offer some advice.
GaryVisit Us: www.automationshop.co.uk
-
25-10-2008 #2
-
25-10-2008 #3
lots of discussion on CNC'ing the X3 on CNCZone
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Super sieg x3 conversions
By dazza in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 19-02-2014, 10:28 AM -
CONVERSION: Sieg Super X3 conversion
By Sooty in forum Conversion Build LogsReplies: 0Last Post: 06-03-2013, 02:29 PM -
eBay: small milling machine Sieg Super X3
By Fivetide in forum Items On eBay UKReplies: 0Last Post: 19-11-2012, 01:48 PM -
Super X1L Suggested Accessories ?
By ecat in forum Milling Machines, Builds & ConversionsReplies: 7Last Post: 05-10-2010, 12:07 AM -
Super X1 conversion - CNC Fusion kit
By bruce_miranda in forum Sieg Milling MachinesReplies: 12Last Post: 19-09-2008, 01:43 PM
Bookmarks