Threaded View
-
20-02-2012 #11
Last Activity: 29-01-2018
Well...guess what...we have a problem...after around four or five hours intermittent use the z axis is misbehaving....when i jog down it goes up and when i jog up it goes down...hehe not... bloody Chinese gremlins!!!
The odd thing is that we can move the gantry to a certain position on the bed and it works fine but within a limited area. Because we need the parts urgently we are running it for the moment in this manner but its a pita!
I think because it works ok in one area of the machine that the problem is most likely to be with the wiring and not the driver boards...at least im hoping so..because any issue with the wiring would be a lot easier to resolve!
Forgot to mention that we are using Mach3
Anyone come across a similar problem?Last edited by camhguh; 20-02-2012 at 12:22 PM. Reason: include mach3 detail
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Chinese Nema 34 packages on ebay
By adamh in forum Marketplace DiscussionReplies: 4Last Post: 06-12-2013, 12:24 PM -
Chinese CNC machines - Request
By craigrobbo in forum Milling Machines, Builds & ConversionsReplies: 11Last Post: 03-05-2012, 05:55 PM -
NEW MEMBER: Just purchased Hardinge HL TFB tucson arizona usa
By jimbocafe in forum New Member IntroductionsReplies: 1Last Post: 19-12-2010, 02:45 PM -
Used Routout CNC Recently?
By CraftyGeek in forum General DiscussionReplies: 1Last Post: 17-07-2010, 12:37 PM -
Purchased a Taig CNC Micromill from Ebay
By alan2525 in forum Marketplace DiscussionReplies: 10Last Post: 16-04-2010, 10:53 AM
Bookmarks