. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 20-02-2012 #1
    modcube's Avatar
    Lives in Flix, Spain.
    modcube
    Last Activity: 19-03-2012 Has been a member for 9-10 years. Has a total post count of 9. Received thanks 1 times, giving thanks to others 0 times.
    Quote Originally Posted by camhguh View Post
    Well...guess what...we have a problem...after around four or five hours intermittent use the z axis is misbehaving....when i jog down it goes up and when i jog up it goes down...hehe not... bloody Chinese gremlins!!!

    The odd thing is that we can move the gantry to a certain position on the bed and it works fine but within a limited area. Because we need the parts urgently we are running it for the moment in this manner but its a pita!

    I think because it works ok in one area of the machine that the problem is most likely to be with the wiring and not the driver boards...at least im hoping so..because any issue with the wiring would be a lot easier to resolve!

    Forgot to mention that we are using Mach3

    Anyone come across a similar problem?
    This is definitely a problem with the wire, I've found some people that had this problem too.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to modcube For This Useful Post:

    camhguh
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese Nema 34 packages on ebay
    By adamh in forum Marketplace Discussion
    Replies: 4
    Last Post: 06-12-2013, 12:24 PM
  2. Chinese CNC machines - Request
    By craigrobbo in forum Milling Machines, Builds & Conversions
    Replies: 11
    Last Post: 03-05-2012, 05:55 PM
  3. NEW MEMBER: Just purchased Hardinge HL TFB tucson arizona usa
    By jimbocafe in forum New Member Introductions
    Replies: 1
    Last Post: 19-12-2010, 02:45 PM
  4. Used Routout CNC Recently?
    By CraftyGeek in forum General Discussion
    Replies: 1
    Last Post: 17-07-2010, 12:37 PM
  5. Purchased a Taig CNC Micromill from Ebay
    By alan2525 in forum Marketplace Discussion
    Replies: 10
    Last Post: 16-04-2010, 10:53 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules