5-axis Breakout Includes Hand-Held Control Port & 3,4,5-axis Postion-Display Port

[Everlearning]

be carful not to mix up the TB6560 driver boards with break out boards
a typical TB6560 driver board is an all in one board (drivers built in) and a break out board is the interface between your PC and your (stand alone) drivers

there are "horror" stories regarding the TB6560 boards ... over stated in my opinion as they do work, ...................

Thanks blackburn mark. I wasn't mixing up the BoB with the TB6560 boards and I've now read up on the fixes for them. I realise those TB6560 boards carrying 3,4 or 5 axis don't seem to need a separate BoB but I guess those and the single axis boards all come out of a similar stable. I was really trying to get to the bottom of how good or bad the cheap BoBs are and do they really offer the facilities claimed using the pendant that goes with it.

[lasek]

Hello,

I have bought 5 axis break board and 3 axis dispaly module.

Unfortunatly cable this display is not comapatibile with this board because male connection has different pins number and sequence cables should be different! Display module have the same 9 pins as breakout board.

Do you know what should be sequence cables from display module to breakout board?

Thanks,

[Ekfer]

Hello,

I have bought 5 axis break board and 3 axis dispaly module.

Unfortunatly cable this display is not comapatibile with this board because male connection has different pins number and sequence cables should be different! Display module have the same 9 pins as breakout board.

Do you know what should be sequence cables from display module to breakout board?

Thanks,

Hello Lasek: You should direct your question to "Lovelearn". He might help you with this problem. I know that you have to specifically purchase the pendant for that bob. They look the same on ebay but they are not!
I'm still building my machine and have not used the bob. Take care