Thread: Greetings from Estonia
-
02-02-2012 #1
Hello
Kalle from Estonia and I am very interested in building a CNC. I am a hobby builder and try to find new solutions for the construction of the CNC. My first CNC was ready or operational, in June last year. It was made on the basis of buildyourcnc.com, but was made of metal. Since I do not have the opportunity to use the welding process, the next machine is made of plywood. I really like the design of plywood products. I thought, why can not a machine made of plywood. Buildyourcnc.com it is very well received and it is a very good design. But I wanted to test myself and start a new design.
Pictures later,
regards
-
06-02-2012 #2
Here are pictures allowed.
Table size is 1200x950 and cutting area 800x850x100
Cutting speed 1000mm/m
Trapezoidal screws used 1604 for 2 y-axis and 1 x-axis,1203 for z-axis.
NEMA 23 425oz motor for each axis.
Bearings are a local bearing store,V-groove bearings will come later
Software Linuxcnc.
Currently, the testing phase, but works.Needs many upgrades.
New gantry sides,made with this machine.
Two trapezoidal nut per screw
Router from hobby store
x-axis
Last edited by idegraaf; 10-02-2012 at 11:54 AM.
-
06-02-2012 #3
Table size 1200x950 and cutting area 800x800x100
Trapezoidal screws used 1604 for 2 y-axis and 1 x-axis,1203 for z-axis.
Nema 23 425 oz motors for each axis.
Bearings from local bearing store, later update to V-groove bearing.
Software Linuxcnc
The machine is in the testing phase
New gantry sides,made with this machine.
Router from hobby store
Hammer,if something does not work :)
Trapezoidal nuts 2 per screw
Regards,
Kalle
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks