Greetings from Estonia

[idegraaf]

Table size 1200x950 and cutting area 800x800x100
Trapezoidal screws used 1604 for 2 y-axis and 1 x-axis,1203 for z-axis.
Nema 23 425 oz motors for each axis.
Bearings from local bearing store, later update to V-groove bearing.
Software Linuxcnc
The machine is in the testing phase

New gantry sides,made with this machine.


Router from hobby store


Hammer,if something does not work :)


Trapezoidal nuts 2 per screw

Regards,
Kalle