Quote Originally Posted by jimg100 View Post
I bought a strike CNC balls up this year, it too was a month+ late and had all the above faults and more. It was supposed to have traverse speeds of 6m/min+ but Michael Powel advised that 6 would be best, to date I can only run at 2m/min. I went through the control cabinet and reconnected all the wires as they had been stripped too far and were also all loose one fell out of the emergency stop switch.
Is Strike still going or have they gone bust as they are'nt answering any cals or emails?
Sorry to hear of that Jim. Its a horrible feeling isn't it.

I assume Strike CNC are still active because I had an email from them saying they were taking legal action against me for the contents of this thread.

My advice is to do what I did and contact Trading Standards giving them a full and detailed report of situation your in and the faults with the machine. If you believe it was dangerous tell them that too and why. Even better if you have photographs.

Here's the details for trading standards and citizens advice along with the telephone number for both. You might be better off finding your local trading standards office and calling them, I did this.
http://www.tradingstandards.gov.uk/advice/index.cfm
http://www.adviceguide.org.uk/
08454 04 05 06

Good luck and keep us updated.