Motor? Winch? Other?

[John S]

No not on their web site any more, it was on offer last Monday so they just might still have stock, try a phone call.
It's a two pack deal, one box contains the winch, identical to this one.

http://www.machinemart.co.uk/shop/pr...ic-power-hoist

And a second box with a swivel jib in it. As I say I have not undone that one as I'm building one onto the small TOS lathe for lifting big electric motor rotors into the chuck and to be honest the jig looks a bit flimsy.

I really need about 350 to 400 kg lift so I'm going to build another set of falls into the cable lift which should give me a safe working load of 500kg.

[mocha]

yep, thanks for that John!

Google brought up some of that info, including an email help address so I've sent the question off to them, I'll ring the local branch in the morning too.

did find this too, although you probably have already seen it??

Specifications: Payload: 125kg without pulley or 250kg with, Lifting height: 11.5m without pulley or 5.7m with, Rope speed: 8m/minute without pulley or 4m/minute with, Hoist lever arm: 600kg at 750mm and 300kg at 1100mm