. .
  1. #1
    I have a 3-axis milling machine. I'd like to mill a 'waveguide', basically a horn for a speaker. It needs to have a smooth continuous curve on the inside. It seems like it should be possible to mill this with a 3-axis machine if all axis are moved simultaneously, although I realise it is always going to be time consuming and the smoothness of the surface will be dependant on how many passes it makes.

    I could kind of do this manually if I made lots and lots of contours, say 0.5mm offset from each other.

    Is there another way to get the computer to mill it? I use Dolphin Partmaster, maybe another program is needed?


  2. #2
    I may of taken this the wrong way... but would it not be easyer to mill a mould and vacuum form this part?

  3. #3
    Yes you can do this.
    Open Partmaster CAM, open existing job, go to examples and select CAM then select contour with z profile.

    Run the file and you will see how t works by using a contour and a profile.
    John S -

  4. #4
    Thanks! I think that sorts me out... just need a little practice now.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Guitar Hero Meets, T-Slotted Profiles !!!
    By Lee Roberts in forum General Discussion
    Replies: 4
    Last Post: 24-04-2019, 12:20 AM
  2. Ridges in 3D profiles = hair loss and lots sandpaper
    By Shinobiwan in forum Machine Discussion
    Replies: 9
    Last Post: 11-04-2013, 07:45 PM
  3. Milling vice, general milling vice or tool vice?
    By Web Goblin in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 15-12-2012, 11:15 PM
  4. Aluminium Profiles
    By wizer in forum General Discussion
    Replies: 10
    Last Post: 10-03-2010, 11:41 AM
  5. RFQ: Need some PCB's milling - can anyone help?
    By irving2008 in forum Projects, Jobs & Requests
    Replies: 4
    Last Post: 20-05-2009, 07:33 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts