. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 22-02-2009 #9
    Smiler's Avatar
    Lives in Isle of Arran, Scotland, United Kingdom.
    Smiler
    Last Activity: 04-03-2023 Has been a member for 9-10 years. Has a total post count of 270. Received thanks 1 times, giving thanks to others 1 times.
    I would just make two more trucks and extend the bolts you are using for bearing axles to attach the new truck at 90 degrees. With a bit of shimming the bearing which will now be underneath the tube can be made to contact it quite securely. So hard to describe this in words

    Basically, keep the truck as you have it but bolt on another identical truck using the axle bolts from the first then shim. This will also allow you to support the rail with no interference. This will do what you want. You only need one extra truck per side so two new trucks to make Kammo, shouldn't take more than 15 mins so get cracking!
    ;)
    Jeff.
    Last edited by Smiler; 22-02-2009 at 01:11 PM. Reason: I forgot a bit
    Nothing is foolproof......to a sufficiently talented fool!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Homebrew Allegro uStep Driver
    By epninety in forum Electronic Project Building
    Replies: 0
    Last Post: 06-09-2011, 11:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules