Hi Rich
Many thanks for replying ....Now where to begin ... I have been looking around for the last few weeks at some of the programmes etc like Mach 3 and lazy cam to run with a KX3 mill , and its got me scratching my head , I have done bits and bobs on cad but nothing as complex as this sort of stuff most of the stuff I did went off and some other poor soul had to do the programming. I suppose I am looking for a Dummies guide sort of thing as a lead in ... before I ask too many stupid question of which I have a million :confused:.
I suppose the ultimate would be to watch some one work through the process and see how its done on a simple level ... I have been stood at the side of some big multi Axis stuff with powered tools etc that to me looked like they had dropped it off from NASA, whilst the guy explained this that and the other whilst it machined one of my job and I stood and watched like a kid in a sweet shop waiting for the first off to drop off the belt!! and the production manager fumed away like a capstan full strength !!


Once again thanks for your help

Mark