Morning All

[MAW]

Hi Rich
Many thanks for the very informative reply and taking time out to help me , I have included a copy of a screen shot that a design chap put together for me a while ago.. He drew it up for me as a favour during his lunch time last year , I passed him a stack of photography books and helping him out with a camera... I have a STL file for it and can open it with a copy of freemill.. The part needs some re work but I cant see that as a problem back to the design chaps, which should not cost too much as I have the file already.
This is the type of thing I would like to make , it will be made from Acetal along with about another 7 or 8 jobs I am working on , I was made redundant in the middle of last year so the parts are for some equipment I am working on. I have had some of the parts out for quote from some of the engineering companies I used in the past but the prices that come back are a little frightening .. To be honest they are small batch work that’s probably more of a pain to make.. which I fully understand ... I have made up a test part by hand “ knife and forking it “ has my friend Ray would have said . Would this be classed as 3d or 2 ½ d

Many Thanks for everyone’s help so far

Mark

[JAZZCNC]

Mark check your PM's but depending which side of barnsley I only live 8 miles away maybe less.!!

So come have a cuppa, bring your acetal and we'll knock them off in no time. They are 2D/2.5D by the way.