. .

Thread: Better finish

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 16-03-2012 #1
    luke11cnc's Avatar
    Lives in Rugby, UK, United Kingdom.
    luke11cnc
    Last Activity: 18-05-2019 Has been a member for 9-10 years. Has a total post count of 389. Received thanks 11 times, giving thanks to others 26 times.
    Well I did as suggested and lowered my cutting bed by 20mm and recut my carving relief I also slowed down the finish pass to 360m/min and the results where the same.

    my current velocity is set at 3000 and acceleration is set to 600

    what would your next move be ??

    James
    Reply With Quote Reply With Quote
  2. 16-03-2012 #2
    Musht's Avatar
    Lives in Edinburgh, United Kingdom.
    Musht
    Last Activity: 13-09-2015 Has been a member for 9-10 years. Has a total post count of 173. Received thanks 13 times, giving thanks to others 5 times.
    Naive view from newbie alert.

    Have you tried carving a similar but different relief?

    Tried feeding the G-code through Cutview to see if its a mistake in the actual code?

    http://www.cutviewer.co.uk

    Cheers
    Adam
    Reply With Quote Reply With Quote
  3. 26-03-2012 #3
    Musht's Avatar
    Lives in Edinburgh, United Kingdom.
    Musht
    Last Activity: 13-09-2015 Has been a member for 9-10 years. Has a total post count of 173. Received thanks 13 times, giving thanks to others 5 times.
    Did you get to the bottom of this James?

    Cheers
    Adam
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to get this finish..?
    By Wal in forum Metal Finishing Techniques
    Replies: 15
    Last Post: 02-02-2017, 11:08 PM
  2. edge finish - ripples and ridges
    By dsc in forum Metalwork Discussion
    Replies: 9
    Last Post: 08-07-2013, 08:53 PM
  3. Can you identify this paint on metal finish..?
    By Wal in forum Metalwork Discussion
    Replies: 2
    Last Post: 29-01-2013, 06:25 PM
  4. RFQ: Looking for somone to finish conversion Denford Mirac with Mach3
    By CHudson in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 14-10-2010, 08:20 PM
  5. Need advice on surface finish
    By FatFreddie in forum Machine Discussion
    Replies: 4
    Last Post: 01-05-2010, 02:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules