Building a CNC, x=20" y=20" z=10"

[TommeyReed]

You think! do your self a favor on my threaded, and kiss my A hole.....I'm not done, but you could not see that could you!

I will add a angle bar, and other metal brackets in the future.

Next time rethink your comment before you insult someone...A hole!

Take your chill pill, and watch tv. I don't need someone like you making foolish comments!

[jcb121]

I advise you take those threaded rods out of the machine and stick them up your own ass mate.

[TommeyReed]

Again, if you want to be an ass, so be it.

Another Uk, ass hole. You loser!

Just show how stupid you are starting a fight you can't win, UK is known for that!

Please remove your self from my thread, thanks you.

But no thanks for your opinion!,and stupid comment!

You Troll!

[Lee Roberts]

Again, if you want to be an ass, so be it.

Tommey, the only person being an "ass" right now is you !

Another Uk, ass hole. You loser!

Fancy coming to a UK focused community and not expecting to be greeted by people from the UK :rollseyes:.

Just show how stupid you are starting a fight you can't win, UK is known for that!

What fight, did i blink and miss it Jazz ?

Please remove your self from my thread, thanks you.

It's not your thread, all your threads are belong to me !

But no thanks for your opinion!,and stupid comment!

I only say things once Tommey so take heed, show some respect or your gone. Nice and simple !

You Troll!

That's not nice, i happen to like Troll's and take offense to that comment!, Jazz is not a Troll!

[TommeyReed]

Ok, I added the base.

This is a I beam 3" x 4" 1/2 and 1/8 l brackets

I attached it to the upper level of the mill.

I have about $125.00 us in this mill so far.

[JAZZCNC]

That's not nice, i happen to like Troll's and take offense to that comment!, Jazz is not a Troll!

Lee thanks for defending my integrity and your right I'm not a troll.!!. . . . I'm a short fat ugly nasty bastard.!!. . . .Trolls are lovely miss understood creatures.!!. . . Very much like some over the pond dwellers.. .

[motoxy]

I would calm down if i were you Tommey. You will not get better advice than from jazz and thats all it is Advice. If you find jazz's comments unhelpful then you might not want to waste your time on here.