Building a CNC, x=20" y=20" z=10"

[jcb121]

I advise you take those threaded rods out of the machine and stick them up your own ass mate.

[TommeyReed]

Again, if you want to be an ass, so be it.

Another Uk, ass hole. You loser!

Just show how stupid you are starting a fight you can't win, UK is known for that!

Please remove your self from my thread, thanks you.

But no thanks for your opinion!,and stupid comment!

You Troll!

[Lee Roberts]

Again, if you want to be an ass, so be it.

Tommey, the only person being an "ass" right now is you !

Another Uk, ass hole. You loser!

Fancy coming to a UK focused community and not expecting to be greeted by people from the UK :rollseyes:.

Just show how stupid you are starting a fight you can't win, UK is known for that!

What fight, did i blink and miss it Jazz ?

Please remove your self from my thread, thanks you.

It's not your thread, all your threads are belong to me !

But no thanks for your opinion!,and stupid comment!

I only say things once Tommey so take heed, show some respect or your gone. Nice and simple !

You Troll!

That's not nice, i happen to like Troll's and take offense to that comment!, Jazz is not a Troll!

[TommeyReed]

Ok, I added the base.

This is a I beam 3" x 4" 1/2 and 1/8 l brackets

I attached it to the upper level of the mill.

I have about $125.00 us in this mill so far.

[JAZZCNC]

That's not nice, i happen to like Troll's and take offense to that comment!, Jazz is not a Troll!

Lee thanks for defending my integrity and your right I'm not a troll.!!. . . . I'm a short fat ugly nasty bastard.!!. . . .Trolls are lovely miss understood creatures.!!. . . Very much like some over the pond dwellers.. .