Hi Jason,

Don't know anything about the Triac control software or machine but I would presume that it's a proprierty software which forces you to use there design software.? And to some degree there own hardware/software to control the steppers or servo's.?
It may or may not allow you to import drawings from other cad packages but even if it does allow formats like DXF,DWG etc then chaces are you will still have work to do within the software before you can start cutting.!!. . . . Won't be simply load and start cutting I'm pretty sure of that.!

I think this is why others my have moved away from using the Triac control software so they can have the flexabilty of using any CAD/CAM software they like.!!

Unfortunatly I also suspect this will mean a few changes required to the control box and the chances are you will need to replace there proprierty custom drives or circuit boards with aftermarket drives and maybe a breakout board. Things like PSU's and some of the other componants like spindle boards ets will possibly be re-usable.?
Thou I suspect due to the tool changer you will have some custom built boards in there some where and chances are it's running servo's so could become expensive to retro fit.??

Sorry can't be of more help.!!