Winner 90 DRIVER PTP PROBLEM

[fordwise]

Hi all, would be very gratefull for any help please!!!

Have a bussellato optima 3-axis machine which runs Winner90 through windows 98 operating system (was told it only runs in this?)..

I have now installed the Winner90 on a newer PC...

The PC runs windows 7 but I have a Virtual PC running windows 98 in it...

I have installed all the necessary files for Winner90 on this new PC, all the programs seemed to be installed and running correctly untill I connected the COM PORT which 'talks' to the CNC via PTP1000, I then had an error saying initializaton unsuccessful TRY AGAIN? YES/NO...

I am currently stuck as have no documentation on the install and cant find anything on the internet either!

Please Help!

[ptjw7uk]

Have you set up a com port in the virtual PC.
It will not connect unless you set the port, I assume your PC has an actual port as laptops now no longer have them.

Peter

[fordwise]

Have you set up a com port in the virtual PC.
It will not connect unless you set the port, I assume your PC has an actual port as laptops now no longer have them.

Peter

Hi Peter,

Thanks for your reply, I will get my I.T guy to look at this tomorrow...

Yes it has a port, the PC has been purpose built to replace the older model, just a shame Winner90 will not run in windows7...

Always thought the updating would be more of a challenge than it seemed and looks like i'm unfortunately correct :(

[letsgotothepub]

Hi Peter,

Thanks for your reply, I will get my I.T guy to look at this tomorrow...

Yes it has a port, the PC has been purpose built to replace the older model, just a shame Winner90 will not run in windows7...

Always thought the updating would be more of a challenge than it seemed and looks like i'm unfortunately correct :(

Hi Guys,

Did you have any luck installing this -

I have got it installed but once i go to send a program to the machine i get this error message-


Number of param. wrong in function n. 92


Can anyone shed any light on this?

Many Thanks in Advance

Eric

[JohnH]

Hello

I have optima running on winner 90 windows 3.1. I have tryed to explore upgrading computer but have no success. I would appreciate if anyone has found a way would they let me know.

If there are any other questions that anyone has about both Busellato optima and Jet machines i would try to help 10 years experience.

Many thanks

John

[fordwise]

Had success, upgraded to windows xp without too much of a hitch in the end...

Now have remote access to the machine making life much easier!

[Scott44]

Hello

I have optima running on winner 90 windows 3.1. I have tryed to explore upgrading computer but have no success. I would appreciate if anyone has found a way would they let me know.

If there are any other questions that anyone has about both Busellato optima and Jet machines i would try to help 10 years experience.

Many thanks

John

Hi John

I am trying to learn to program a 1995 Optima 55 running winner 90 and am a beginner.
Do you have any information you could give me to get me started? I cannot find any help on the internet so far.
It would be really appreciated.
Thanks and regards

Scott

[Frank]

Hi every one.
I can install a copy of the Winner90 and PTP1000 on a computer runing Windows XP.
I already did it for a Busellato S.Master and it's woring well