542 Vs Geckodrive boards?

[Gary]

I agree to this, i have sold over 8K M542 and must have had about 10-15 back, and i cant say they were manufactures defect either.
The M542 is a very robust little bugger.

I fried 12 of Marriss's 210's. Only to be told it was my motors, wiring, position of the moon etc.
Even though when it fried one an APC drive I had as a back up [ but was sloooow ] would go straight in and run ?

What really pissed me off was 2 years down the line, after switching to Leadshine's with absolutely no problems, Marriss posted on CNCZone " Does anyone remember the 210's that used to blow up on start up ?"

Oh how we laughed [ NOT ]

Christ knows how many Leadshines I have fitted, got to be in the high hundreds, and so far I'm 3 down, That looks good odds to me.

[JAZZCNC]

I agree to this, i have sold over 8K M542 and must have had about 10-15 back, and i cant say they were manufactures defect either.
The M542 is a very robust little bugger.

So when you having another discount weekend Gary I need some stuff soon.!!

So I cannot agree that their service is top notch.

OK well have to agree to disagree John.!

[Jonathan]

So when you having another discount weekend Gary I need some stuff soon.!!

The 3nm stepper motors will have to be discounted a lot now they've increased in price to make them competitive. CNC4You is currently much cheaper.