New to MyCNCuk

**Lee Roberts** · 27-03-2012

Hi peter, have a look at the units from Roy over at www.diycnc.co.uk/html/drv30_s.html, they are 3a drivers and very cheap. I think these maybe a good starting point for such a machine.

Stay away from the TOSHIBA TB6560 units from ebay, if you do a search on these forums you will read about the problems these units have.

Good luck with the build and welcome to the site.

.Me

**m1ptr** · 28-03-2012

Originally Posted by Lee Roberts

Hi peter, have a look at the units from Roy over at www.diycnc.co.uk/html/drv30_s.html, they are 3a drivers and very cheap. I think these maybe a good starting point for such a machine.

Stay away from the TOSHIBA TB6560 units from ebay, if you do a search on these forums you will read about the problems these units have.

Good luck with the build and welcome to the site.

.Me

Thanks for the advice on the TB6560 they do look like they have a reputation as smoke emitters!

Cheers
Pete