USB TO Parallel Port DIY Interface

[ronmalfred123]

please help me.. i have been working on pic18f4550 for making a usb to parallel port ,,, i saw a hope after looking this thread...

due to cost reasons i can stick to pic18f4550 only...

the firmware and software links are dead please update ,,some one help :( :( !!!!!
...
there are some more doubts regarding this thread,after i program the micro controller and make all driver loading will my computer will detect it as LPT ? (as printer port in device manager like that of desktop systems)if know that how will be able to access the DB29 port?

:( :( i am in an urgent need of help... i will be very thank ful; :)

rony

[irving2008]

please help me.. i have been working on pic18f4550 for making a usb to parallel port ,,, i saw a hope after looking this thread...

due to cost reasons i can stick to pic18f4550 only...

the firmware and software links are dead please update ,,some one help :( :( !!!!!
...
there are some more doubts regarding this thread,after i program the micro controller and make all driver loading will my computer will detect it as LPT ? (as printer port in device manager like that of desktop systems)if know that how will be able to access the DB29 port?

:( :( i am in an urgent need of help... i will be very thank ful; :)

rony

I am afraid CNCDudeZ website is down and hasnt been updated for a while. You could try PM'ing CLaNZeR (CNCDudeZ) direct but he's not been around for a while and I don't think he supports this project any more.

Moderators