-
03-04-2012 #1
Hi all,
I have a Boxford 125 TCL converted to Mach3 control, fully working and a Boxford AUD in great condition.
I use the 125 TCL for all CNC small jobs and keep the AUD for all big stuff with no much details (Job done manually)
I am now looking for a CNC machine that could replace both of these... The EasiTurn from Denford seems to be an option...
Could use any of the 2 lathe I have as payment / part exchange...
The AUD is 3 phase and has converter built in to run from single phase and vari-speed...
comes with a lot of tooling (3 jc, 4jc, face plate, QCTP + 4 holders...)
The TCL125 has a QCTP and 3 or 4 holders (not sure, I need check)
I am after an EasiTurn in original condition or converted to Mach3, not too wory about the electrical (I can fix that / convert...I am an electronic eng.)
But the Mechanic need to be good. No broken bits, or serious rust.
I am open to suggestions / arangements / similar model / Brand... But no chinese import!
Ta,
LaurentLast edited by rnr107; 04-04-2012 at 01:47 PM. Reason: just realised that "Easy" in easiturn is spelled with an "i" :-)
-
23-08-2012 #2
I have an easiturn 3 with very low hours pneumatic chuck auto tool post standard denford controller . Open to sensible offers ,
john 07799281215
1 guard is damaged and removed but there with machine
-
23-08-2012 #3
-
23-08-2012 #4
-
23-08-2012 #5
just powered them both up after 5 years idle and the easiturn 3 is showing exceeded travel in the x axis , could this be something stuck as its been idle so long they were working correctly when last used ???
-
23-08-2012 #6
Hi John,
What I was proposing to exchange was a Boxford AUD 5".
It is 3 phase, but has un inverter built in... And therefore runs of single phase.
It is one of the best manual lathe in its class I beleive... Run smooth.
With that and the potential problem on the easyturn in mind, I can do a direct swap if you are happy with that...
But I would need a few pictures.
Laurent
-
24-08-2012 #7
sorry the easiturn is now sold
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
REBUILD: Boxford 125TCL
By Roadrunna in forum Lathe Rebuild LogsReplies: 4Last Post: 23-08-2014, 05:15 PM -
WANTED: Wanted, PCB's from a Boxford 125TCL
By dragon in forum Items WantedReplies: 1Last Post: 12-06-2013, 02:32 PM -
WANTED: Boxford 125TCL Chuck Wanted
By JAZZCNC in forum Items WantedReplies: 8Last Post: 01-02-2013, 12:51 AM -
WANTED: denford nova/star mill - emco f1/ pc50 - boxford vmc or similar wanted
By jonnydeen in forum Items WantedReplies: 2Last Post: 04-06-2012, 12:31 PM -
WANTED: Bridgeport style miller wanted/ Boxford VM30 miller part ex or sale.
By border in forum Items WantedReplies: 2Last Post: 02-04-2012, 09:13 PM
Bookmarks