Boxford 125TCL Ugraded to Mch3 - fully working

[rnr107]

Hi all,
Here is for sell my Boxford 125TCL CNC lathe. All electronic replace with modern control (Gueko Drives)
RPM controlled via PWM.
comes with QCTP + 4 holders

Looking for £500.00 or could exchange / part exchange for an Orac / easyturn (see my post in WANTED section)

Ta,
Laurent

[MAW]

HI Laurent is the lathe still with you.

Mark

[rnr107]

HI Laurent is the lathe still with you.

Mark

Hi Mark,
Yes, the lathe still with me... :-)

Laurent

[Chirpy]

Hi Mark,
Yes, the lathe still with me... :-)

Laurent

Hi Laurent,
Only seen this today, is it still with you?
John

[rnr107]

Hi Laurent,
Only seen this today, is it still with you?
John

Hi John,
Yes, still with me... :-)

Laurent

[Chirpy]

Hi John,
Yes, still with me... :-)

Laurent

Hi Laurent,
Can you forward details of modifications, any pictures etc and use to which you have used the lathe.
Are you still looking for circa £500?
Many thanks
John

[rnr107]

Hi John,
All mods are electronic.
I removed the original control panel, replaced all the original electronic (exept the spindle control board) with modern drivers.
Added a BOB to connect to a standard Parallel port of a PC.

I'll post pictures ASAP. No problem!.

£500 still fine...

Laurent

[rnr107]

Here are some pictures of the machine:


Here is the picture of a part made on the 125:


Do you want pictures of the electronic?

Laurent

[craigrobbo]

interested in this, I don't supose you have any video of it working and what it would be like cutting aluminium?

[rnr107]

interested in this, I don't supose you have any video of it working and what it would be like cutting aluminium?

Hi Craig,
It does cut alluminium no problem... Unfortunatly I do not own any video camera... :-(
But then again, I am sure if you do a UTube search on Boxford 125TCL you'll find something! It is a very popular little lathe...

Here is one:
http://www.youtube.com/watch?feature...&v=pgAdO5TLDN0

Laurent