Hybrid View
-
03-04-2012 #1
Hi all,
Here is for sell my Boxford 125TCL CNC lathe. All electronic replace with modern control (Gueko Drives)
RPM controlled via PWM.
comes with QCTP + 4 holders
Looking for £500.00 or could exchange / part exchange for an Orac / easyturn (see my post in WANTED section)
Ta,
Laurent
-
11-06-2012 #2
HI Laurent is the lathe still with you.
Mark
-
11-06-2012 #3
-
20-06-2012 #4
-
20-06-2012 #5
-
20-06-2012 #6
-
22-06-2012 #7
interested in this, I don't supose you have any video of it working and what it would be like cutting aluminium?
-
22-06-2012 #8
Hi Craig,
It does cut alluminium no problem... Unfortunatly I do not own any video camera... :-(
But then again, I am sure if you do a UTube search on Boxford 125TCL you'll find something! It is a very popular little lathe...
Here is one:
http://www.youtube.com/watch?feature...&v=pgAdO5TLDN0
LaurentLast edited by rnr107; 22-06-2012 at 06:38 PM.
-
23-06-2012 #9
i've had a few of these lathes, and for their size they are very capable machines and will machine ally with no problems at all. Considering the amount of mods on this 125 it's a steal at £500.
-
24-06-2012 #10
Laurent
How are you chap, i swapped this with you for the Sherline mill..
What did you do with the electronics?
Good look with sale, i would defiantly have this back if it were capable of bigger things
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
REBUILD: Boxford 125TCL
By Roadrunna in forum Lathe Rebuild LogsReplies: 4Last Post: 23-08-2014, 05:15 PM -
WANTED: Wanted, PCB's from a Boxford 125TCL
By dragon in forum Items WantedReplies: 1Last Post: 12-06-2013, 02:32 PM -
Anyone stripping out a Boxford 125TCL
By dragon in forum Boxford LathesReplies: 0Last Post: 14-03-2013, 10:10 PM -
WANTED: Boxford 125TCL Chuck Wanted
By JAZZCNC in forum Items WantedReplies: 8Last Post: 01-02-2013, 12:51 AM -
WANTED: Boxford 125TCL Tool holder?
By Minnican in forum Items WantedReplies: 2Last Post: 16-02-2011, 09:22 PM
Bookmarks