Another Newbie

[Chris J]

On small parts I often leave a thin skin 0.1-0.2mm and don't actually cut right thru so it's kind of like a one big tab then just clean up with de-burr tool or quick blast across the sander and the skins gone, tabs on small parts don't really work very well.!

I've been trying to get my head around this tab/skin business.

Are you saying that after cutting out I would use something like an orbital sander to remove the skin ad drop each piece out of the sheet.

Would a deburring tool go through a tab of say 0.2mm skin or tab?


Chris