CNC brass engraving from an stl file

[JAZZCNC]

Hey MrJazz, did you get the mini mould test sample file I sent you, the one with just the 3 figures on? What would you want from me to machine that beauty?

Hi S,

Yes got it and thats relatively easy just will be time consuming due to requireing some very small cutters using tiny stepover amounts.!! The tiny cutters also increase the chance of tool snappage to scarey levels. .

The multi figure plate is the real challenge to cut and keep detail and will take a massive amount of time and again due to tool breakage potential not something I'd like to do for the laugh.?? . . Can you imagine being 18hours into 20hour job then the toolsnaps and wrecks the mould. . Arghhhhhh don't come near and the air would turn blue in London even thou I'm in yorkshire.!!

[Statstastic]

Hey Jazz,
I completely respect what your saying about the risks involved and I wouldn't want to be responsible for you uttering profanities. In terms of snappage I've got 3 x 0.3mm ball nose cutters and 2 x 1mm end mills going spare which I bought when I thought I could do it myself. Let me know if you'd like any.