45 Degree and round-over bits?

[JAZZCNC]

Hi guys,

I need a 45 deg V bit for making mitre joints on ~18mm MDF. If possible I'd like the option of using the same bit for chamfer jobs on aluminium.

Can you recommend? Should I just get a general good quality hand router bit?

Secondly I need a round-over bit for the same materials. Probably got more use for aluminium on this one.

This is what I use for both wood or aluminium from Wealden tools.
http://www.wealdentool.com/acatalog/...roove_285.html

This for rounding over in wood, it will do Ali but you need to go carefull with several pass's and have stiff machine other wise you'll get chatter.
http://www.wealdentool.com/acatalog/...ading_217.html

[Chas]

For milling alloy, I get my corner rounding bits by getting a re-sharpening Co' to grind old cutters up.

I use these : http://www.lmcuttingtools.com.

My last one, a 10deg corner from a 12mm 3 flute cost me £12ish !