Thread: 3 Axis CNC router
-
15-03-2015 #141
That looks great - very sturdy and neat. Great stuff. G.
-
The Following User Says Thank You to GEOFFREY For This Useful Post:
-
15-03-2015 #142
Looking Good Joe but your gonner need more room buddy.!! . . . . It's good as well you have a before and after shot of how clean the room looks because it never look like that again after those chips start flying. . .Lol . . . . Get cracking need to See Video movement next.!!!
-
The Following User Says Thank You to JAZZCNC For This Useful Post:
-
15-03-2015 #143
-
15-03-2015 #144
Looking good Joe, keep it slow and steady that way you'll not make any mistakes!
-
The Following User Says Thank You to njhussey For This Useful Post:
-
15-03-2015 #145
-
17-06-2015 #146
Some stills from my updated model...
-
The Following 2 Users Say Thank You to JoeHarris For This Useful Post:
-
17-06-2015 #147
Hi Joe,
Coming together nicely now. Is there any reason on the gantry for putting the X axis bearings out the back and the spindle hanging out the front? Normally you would put a bearing near the spindle axis to give more support. Do you need to cut right over the edge of the machine?
Not saying it won't work as drawn because it will, just that it could be a little better if there was no reason for the bearings positioning as drawn.
-
20-06-2015 #148
The reason was clashes in fixings. I am going to make some changes to that area anyway to bring the ball screw mounts to the outside of the gantry sides, so I'll try and take on your advice too... Cheers
-
21-06-2015 #149
Looks a very nice setup..
I am interested in a similar style'll of machine capable after taking an 8*4 sheet material....would be gratefully for some advice on material suppliers ,like aluminium extrusion and bearing guides ect.
-
23-08-2015 #150
-
The Following User Says Thank You to JoeHarris For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 30 users browsing this thread. (0 members and 30 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
3 axis cnc/router bed
By dudz in forum Marketplace DiscussionReplies: 23Last Post: 28-12-2012, 09:38 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks