Thread: 3 Axis CNC router
Hybrid View
-
08-02-2016 #1
Last Activity: 09-02-2023
Like the blue lines in this?:
Originally Posted by njhussey
I'd still put the top idler on the end of the square section (with a suitable thick plate welded/bolted in) and move the lower idler to the first idler's position.....
-
09-02-2016 #2
Last Activity: 09-02-2023
If at first you don't succeed... be glad you modeled it first!
-
The Following User Says Thank You to JoeHarris For This Useful Post:
-
08-02-2016 #3
Last Activity: 09-02-2023
I like the idea but it's a pain to implement. I only have a few mm of space:
-
08-02-2016 #4
Last Activity: 09-02-2023
I'm still getting the best part of 7 teeth engaged and 5 fully. According to Jonathan this should be sufficient. I'll have a think...🤔 as always - appreciate the critique even if it does mean more redrawing (again and again!!)
Last edited by JoeHarris; 08-02-2016 at 04:10 PM.
-
08-02-2016 #5
Last Activity: 03-01-2025
Hmmmmm....... Originally Posted by JoeHarris
-
08-02-2016 #6
Last Activity: 09-02-2023
Haha like your confidence Originally Posted by njhussey
-
08-02-2016 #7
Last Activity: 03-01-2025
That's how I've bodged mine in, at some stage I'll design a neat back plate and use the machine to cut it.....a bit Heath Robinson, but it works
Last edited by njhussey; 08-02-2016 at 04:19 PM.
-
The Following User Says Thank You to njhussey For This Useful Post:
-
09-02-2016 #8
Last Activity: 2 Hours Ago
That looks loads better Joe n1!
.Me
-
09-02-2016 #9
Last Activity: 09-02-2023
Cheers Lee!
-
09-02-2016 #10
Last Activity: 03-01-2025
That looks good Joe :)
-
The Following User Says Thank You to njhussey For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 26 users browsing this thread. (0 members and 26 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
3 axis cnc/router bed
By dudz in forum Marketplace DiscussionReplies: 23Last Post: 28-12-2012, 09:38 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks