3 Axis CNC router

[Neale]

Sounds fine. My PSU was originally bought from Zapp, although I have now changed the transformer in it, but it came with three pairs of output terminals already. Then I fitted it in a control box with four stepper drivers...

Must confess that I didn't actually put a wiring diagram together for mine, just some sketches to work out roughly what was needed. Then I set to work with a pile of cable reels, big box of ferrules and crimping tool, and quite a lot of black coffee. Don't try this one at home Still, it does seem to work OK.

[JoeHarris]

Sounds fine. My PSU was originally bought from Zapp, although I have now changed the transformer in it, but it came with three pairs of output terminals already. Then I fitted it in a control box with four stepper drivers...

Must confess that I didn't actually put a wiring diagram together for mine, just some sketches to work out roughly what was needed. Then I set to work with a pile of cable reels, big box of ferrules and crimping tool, and quite a lot of black coffee. Don't try this one at home Still, it does seem to work OK.

Ha yes I would definitely fail with that approach so well done!

Well I've plugged it in and...
It works! Hooray, my first functioning bit of electronics for this machine!

[Neale]

It's great when a plan comes together! Well done. All downhill from here...

[JoeHarris]

It's great when a plan comes together! Well done. All downhill from here...

Thanks Neale wish I believed that! Still, well chuffed with that thanks everyone for the help.

[Nickhofen]

Moving along nicely, very professional work!

[JoeHarris]

Moving along nicely, very professional work!

Thanks!