3 Axis CNC router

**toomast** · 30-04-2017

Looking good!
It is hard to see from the pictures, but please check soldering of the capacitors.

Sent from my LG-H850 using Tapatalk

**JoeHarris** · 30-04-2017

Originally Posted by toomast

Looking good!
It is hard to see from the pictures, but please check soldering of the capacitors.

Sent from my LG-H850 using Tapatalk

Hi Toomast, the terminals on the caps have been pushed through the wire stands and then soldered, I have also put some hot glue over the bare wire to help prevent shorts.

**toomast** · 30-04-2017

Originally Posted by JoeHarris

Hi Toomast, the terminals on the caps have been pushed through the wire stands and then soldered, I have also put some hot glue over the bare wire to help prevent shorts.

Good, maybe the glue makes it look odd on the picture. It can be tricky to get the thicker wires to heat up properly - risk of cold solder joint.