Thread: 3 Axis CNC router
-
06-11-2017 #501
No, don't think it would do any harm.
-
The Following User Says Thank You to Neale For This Useful Post:
-
06-11-2017 #502
Plugging the terminator in shouldn't do any harm, either will leaving it off, as without any expansion modules, the CAN bus won't be doing much.
The purpose of it is to stop signals from reflecting/bouncing of the end of the CAN bus wiring, and causing interference.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
The Following User Says Thank You to m_c For This Useful Post:
-
08-11-2017 #503
Thanks to the Legend that is Dean I got a stepper to move last night - woohoo!
-
The Following User Says Thank You to JoeHarris For This Useful Post:
-
08-11-2017 #504
Awsome!! :D
Skickat från min SM-N910C via Tapatalk
-
The Following User Says Thank You to Nr1madman For This Useful Post:
-
08-11-2017 #505
Very nice!
In a few days you will make dust....men glitter!!!
-
The Following User Says Thank You to Nickhofen For This Useful Post:
-
08-11-2017 #506
Anything on the machine which moves by itself counts as 'first movement' so woo-hoo indeed ! Nice one Joe and nice one Dean where ever you are !
Last edited by routercnc; 08-11-2017 at 08:10 PM.
-
The Following User Says Thank You to routercnc For This Useful Post:
-
08-11-2017 #507
Well Done Joe.
Your thread is a constant spur on for me. I'm in the same position of young children and no time so I know how well you are doing to move the build on.
You will have to start designing those things that you dreamed of making when it was a If only I had a CNC machine I could make ??????.
-
The Following User Says Thank You to grain_r For This Useful Post:
-
15-11-2017 #508
Actual, real life, jogging movement on Y, ladies and gentlemen:
Sent from my iPhone using Tapatalk
-
15-11-2017 #509
Last edited by routercnc; 15-11-2017 at 11:23 PM.
-
The Following User Says Thank You to routercnc For This Useful Post:
-
When's the party Joe
..Clive
The more you know, The better you know, How little you know
-
The Following User Says Thank You to Clive S For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 35 users browsing this thread. (0 members and 35 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
3 axis cnc/router bed
By dudz in forum Marketplace DiscussionReplies: 23Last Post: 28-12-2012, 09:38 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks