3 Axis CNC router

[JoeHarris]

Hi

Version 22 of Mach 3 is working way better! Here’s a video of my first proper little project. No issues https://youtu.be/JBjDpcFo2nk

[Neale]

Good stuff - I was happy with .028 but I doubt that there's much difference. Only key feature is whether or not it works!

[JoeHarris]

Good stuff - I was happy with .028 but I doubt that there's much difference. Only key feature is whether or not it works!

Haha yes very true. I went with 22 as it seems to be what CS Labs recommends.


Sent from my iPhone using Tapatalk

[JAZZCNC]

Hi

Version 22 of Mach 3 is working way better! Here’s a video of my first proper little project. No issues https://youtu.be/JBjDpcFo2nk

The boy's feeling it now...

[JoeHarris]

The boy's feeling it now...

[Wal]

That Hangboard's a cool little project. Very nice indeed.

Wal.

[JoeHarris]

Well Jazz saves the day again! Amazingly a bit of wire stripped from some twin and earth I had laying around bolted into the frame and back to star ground seems to have done the trick! Ran the machine for 8.5hours continuously without any issues. Cheers Dean

[JoeHarris]

Here’s what I was making - a topographical map of (part of) the Middle East cut from Ash. 1st 3D work I’ve tried with the machine.

Top left is Antalya in Turkey and the Taurus mountains, then clockwise Cyprus top middle, the Mediterranean coast of Syria and Lebanon, then Israel and Jordan, the Sinai peninsula, Red Sea and finally Suez, and the Nile opening out into the Mediterranean. Pretty pleased with how it turned out.

Took about 10.5 hours total to cut. Roughed with a 10mm straight cutter then finished with a 1mm radius tapered ballnose.

[mekanik]

Nice Job Joe
Great to see it in action.
Regards
Mike

[JAZZCNC]

Please to see your sorted Joe.

Nice job on the 3D work, Can't beat a 3D file to test the build quality and accuracy of a machine, certainly nothing wrong with your machine.