Quote Originally Posted by JoeHarris View Post
So starting up again, I got the spindle control from Mach set up last night. All seems to work OK, apart from the RPM readout on Mach reads 0 regardless of the spindle speed. Is that normal? The one setting I was not sure about was mach's "spindle pulley" settings. The IP-M manual was not much help on that front. Does anyone know what this should be set to for a 2.2KW chinese water-cooled spindle?
Hi Joe, good to see you back on your machine. Mine’s been working fine since I 95% finished it!! I’ll have a look at my spindle pulley settings tomorrow, I’ve been using it tonight for 4 hours cutting kits but didn’t see your posts (I don’t come on here much anymore, although I should!) in time. Neil


Sent from my iPhone using Tapatalk