Thread: 3 Axis CNC router
Threaded View
-
09-05-2020 #11
Last Activity: 15-07-2024
Now there's a challenge! I don't have Vectric V-carve for which there is a ready-made file available and I've sen a DXF available. Any advice on the best available version or way to cut this? CamBam has a V-carve plug-in but it's not quite up to this job according to it's forum.
Originally Posted by JAZZCNC
If your machine hasn't passed the Aztec test then it's not a real machine yet....
An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 12 users browsing this thread. (0 members and 12 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
3 axis cnc/router bed
By dudz in forum Marketplace DiscussionReplies: 23Last Post: 28-12-2012, 09:38 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks