I have decided to use XLR connectors between the control box and the steppers. I have ordered some 5pin with male for the cable and female for the cabinet. The four cores of my cy will go into pins 2-5 with the shielding braid going into pin 1 like this how to video:
https://youtu.be/89XDGtJzzBc
My question is do you connect the shield as you come into the cabinet or right at the point of connection with the drives? And do you go straight to the cabinet/back plate or run a wire to the star ground. Apologies if this seems basic to some of you!


Sent from my iPhone using Tapatalk