. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-04-2019 #8
    JoeHarris's Avatar
    Lives in Birmingham, United Kingdom.
    JoeHarris
    Last Activity: 09-02-2023 Has been a member for 9-10 years. Has a total post count of 547. Received thanks 65 times, giving thanks to others 128 times. Referred 1 members to the community.
    Quote Originally Posted by AndyUK View Post
    Good to see you back at it Joe - hope you sort those spacers out without too much hassle :)

    I'm still using this thread as an awesome source of information - I've got a couple of questions though:

    Your electrical diagrams are awesome - can you point me towards the software you used?
    Your cabinet looks pretty decently sized for the layout - could you share the dimensions? Would you go bigger/smaller if you did it again?


    Thanks!
    Andy
    Hi Andy, I have an updated circuit diagram that I will upload as I had a few mistakes on the last one... take it with a pitch of salt though as I’m no expert!! I just used the cad software we use at work for the diagram, which is archicad. Not ideal but did the job ok!

    The cabinet is a decent size, I got it second hand off eBay and it had a few bits in it and the rotary switch already installed. I’d defiantly go big if you have the space. I found mine to be about right. I’ll try and get some dims for you.


    Sent from my iPhone using Tapatalk
    YouTube Build Log

    MYCNCUK Build Log
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JoeHarris For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 528 users browsing this thread. (0 members and 528 guests)

Similar Threads

  1. BUILD LOG: 3 Axis Router
    By GTJim in forum DIY Router Build Logs
    Replies: 8
    Last Post: 22-06-2020, 08:49 AM
  2. 3-Axis CNC Router - For Helices.
    By Dalmango in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 08-02-2014, 07:27 PM
  3. BUILD LOG: Wobbly: my first 3-axis router
    By Sodster68 in forum DIY Router Build Logs
    Replies: 8
    Last Post: 20-01-2013, 10:28 AM
  4. 3 axis cnc/router bed
    By dudz in forum Marketplace Discussion
    Replies: 23
    Last Post: 28-12-2012, 09:38 PM
  5. Need 6' x 4' bed, 4 axis router design.. Help..!
    By fasteddy in forum Gantry/Router Machines & Building
    Replies: 29
    Last Post: 17-09-2010, 12:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules