3 Axis CNC router

[JAZZCNC]

I've tried to gey my head round Fusion360 a few times but it just doesn't seem to work for me either. I've used CamBam since the first day I switched on my original MDF and allthread machine and am still very happy with it, especially with the huge range of useful add-ons available from the very active support community. You have to pay for it but it's a one-off payment that gets you a lifetime of updates.

CamBam is another I didn't get on with and I found it limited in what it could do, but that was a long time ago, I'm sure it's come on since.

The problem will either follow the Z driver, the Z wiring, or the Z output on the CSLabs controller.

Most likely a bad wire if it's in this area, I'd be amazed if it's the Cslabs output as they are generally bulletproof.

To be honest, Dean, I would really appreciate a bit of your time to get it set up properly. I feel like I’m going to struggle to ever get it up and running without some expert input! I’ll drop you a DM if that’s alright.

No problem, we will get you going in no time Joe. It will be something silly, usually is.!

Joe just try this for me because I've had this happen before just on Z axis where it won't Jog but it will move with a command... So Do an MDI move.

Make sure got enough room for Z to move Then Zero it out on the DRO and type G1 Z -10 (note the Minus) F500 into the MDI command bar and see if it moves.

Let me know how get on.