3 Axis CNC router

**Andrewg** · 08-05-2020

Well done - if only more Build logs had a payoff like this. Congratulations on a successful build, and thanks for sharing so much here and on Youtube. Your reflections on the journey and lessons learned will be of great interest. Best wishes
Andrew

**JAZZCNC** · 08-05-2020

Originally Posted by Andrewg

Well done - if only more Build logs had a payoff like this. Congratulations on a successful build, and thanks for sharing so much here and on Youtube. Your reflections on the journey and lessons learned will be of great interest. Best wishes
Andrew

Andrew, they do it's just it doesn't always get shown. One of the reasons you don't see so many machines builds finished isn't because they don't get finished, well should say used because they kind of don't get finished. Often it's because soon as they get to the point the machine moves they start using it to make things and that's the last time they do anything to the machine until it breaks or gives trouble.

**Neale** · 09-05-2020

Originally Posted by JAZZCNC

Often it's because soon as they get to the point the machine moves they start using it to make things and that's the last time they do anything to the machine until it breaks or gives trouble.

Ain't that the truth!

...and my own "build log" (well, more a case of what I learnt during the build...) does finish with a couple of examples of work done, although no Aztec plate yet