. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 18-05-2020 #23
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by JoeHarris View Post
    Thanks guys, pretty sure I did this when I first set them up.

    I got the laptop set up - connected it to the ipm but it wouldn’t connect for some reason, then it crashed! Maybe I should persist with plan A!!
    To be honest I thought you had done it because I seemed to remember going thru it with you before. The Software just does the same thing but it does allow you to tweak it, but you should only need to do this is your having resonance issues, etc. Which you are NOT. 99% of the time the Auto tune option works fine.

    RE: Laptop did you set the Adapter IPV4 address to manual .? and set to 10. 1. 1. 1 and 255.255.255.0
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 16 users browsing this thread. (0 members and 16 guests)

Similar Threads

  1. BUILD LOG: 3 Axis Router
    By GTJim in forum DIY Router Build Logs
    Replies: 8
    Last Post: 22-06-2020, 08:49 AM
  2. 3-Axis CNC Router - For Helices.
    By Dalmango in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 08-02-2014, 07:27 PM
  3. BUILD LOG: Wobbly: my first 3-axis router
    By Sodster68 in forum DIY Router Build Logs
    Replies: 8
    Last Post: 20-01-2013, 10:28 AM
  4. 3 axis cnc/router bed
    By dudz in forum Marketplace Discussion
    Replies: 23
    Last Post: 28-12-2012, 09:38 PM
  5. Need 6' x 4' bed, 4 axis router design.. Help..!
    By fasteddy in forum Gantry/Router Machines & Building
    Replies: 29
    Last Post: 17-09-2010, 12:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules