3 Axis CNC router

**JoeHarris** · 05-03-2016

Z axis progress pictures.

Click image for larger version.

Name: ImageUploadedByTapatalk1457135523.501884.jpg
Views: 2973
Size: 215.6 KB
ID: 17826

Click image for larger version.

Name: ImageUploadedByTapatalk1457135559.033223.jpg
Views: 2879
Size: 179.5 KB
ID: 17827

Click image for larger version.

Name: ImageUploadedByTapatalk1457135573.773497.jpg
Views: 2953
Size: 180.5 KB
ID: 17828

Click image for larger version.

Name: ImageUploadedByTapatalk1457135581.777662.jpg
Views: 2883
Size: 208.7 KB
ID: 17829

**Clive S** · 05-03-2016

Very nice as always Joe. Great idea on the spacer plates to save pocketing the ball screw BK mounts although it does push the spindle further out slightly.

**voyager1972** · 29-03-2016

hopefully be starting my own build shortly ,capable of holding an 8*4 sheet.,,,,,,thinking of going with rack and pinion,,,,i am looking on the net for extrusion suppliers in the uk,,,does anyone have any recomendations on material suppliers..i am located in n.ireland.

**Clive S** · 29-03-2016

Originally Posted by voyager1972

hopefully be starting my own build shortly ,capable of holding an 8*4 sheet.,,,,,,thinking of going with rack and pinion,,,,i am looking on the net for extrusion suppliers in the uk,,,does anyone have any recomendations on material suppliers..i am located in n.ireland.

Hi and welcome to the forum it would be better to start your own thread so as to keep all the questions you might have in one place.
Have you built a machine before? and have you decided what you need to cut?
Why not put a design up of what you would like to do. Good luck with the build.