Thread: 3 Axis CNC router
Threaded View
-
13-10-2016 #9
Last Activity: 09-02-2023
Not as long as I thought - half an hour or so. I took 1/2mm per pass which was more aggressive than the last time but was fine. So 32 passes with a 10mm carbide end mill.
Originally Posted by Wobblycogs
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 399 users browsing this thread. (0 members and 399 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
3 axis cnc/router bed
By dudz in forum Marketplace DiscussionReplies: 23Last Post: 28-12-2012, 09:38 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks