Quote Originally Posted by Clive S View Post
Well there is something wrong as even with a bad printer it should only be about .5mm out.

Can you measure the print exactly and work out the scale and then adjust it.

can you post the dxf up here and I will try and print it for you or adjust it in Acad

Ok edit: I have printed out in SW direct from the part on screen but you have to go into "file/print" and then page setup my printer shows "scale to fit" and "scale "100%" choose 100% It works for me.
Will try with new settings, maybe I have a scale error in the printer setup! If I can't get it to work I will pm you with the dxf Clive :)
Thanks in advance!