3 Axis CNC router

**Clive S** · 26-02-2017

As always Joe love the music and the vid. I think this is one of he best router builds on the forum It puts all the wingers to shame. Thanks for the entertainment

**JoeHarris** · 26-02-2017

Originally Posted by Clive S

As always Joe love the music and the vid. I think this is one of he best router builds on the forum It puts all the wingers to shame. Thanks for the entertainment

Cheers Clive!

Sent from my iPhone using Tapatalk

**warwick** · 26-02-2017

getting close now joe!! great build.... if this is your first machine the feeling you get when your creation first comes alive is very strange ...

**njhussey** · 27-02-2017

Joe, that's one mighty fine looking CNC machine, I've enjoyed the build so far and now looking forward to seeing the first chips flying in the not too distant future!!

**JoeHarris** · 05-03-2017

Thanks guys, getting there!!

Sent from my iPhone using Tapatalk

**JAZZCNC** · 05-03-2017

Oh shit just realised didn't reply to your message, sorry Jo slipped my mind will do later today.

**JoeHarris** · 05-03-2017

Originally Posted by JAZZCNC

Oh shit just realised didn't reply to your message, sorry Jo slipped my mind will do later today.

No worries at all! Whenever you get a minute - no hurry!!

Sent from my iPhone using Tapatalk

**JoeHarris** · 14-03-2017

Does anyone have any strong views on grubscrews they would like to share!? I want to get my HTD5M-15 timing pulleys ordered. Do you tend to go for the largest size the pulley can take? For a P14-5M-15F, for example, with an 8mm bore, you can get 1 or 2no. M3 or M4... I'm thinking 2no. M4?? But the P28-5M-15F for my NEMA 34 which will have a 12.67mm bore and a 5mm keyway can go all the way up to 2no. M8 grubscrews which sound huge!? Any thought from those who have gone before? Cheers

Sent from my iPhone using Tapatalk

**njhussey** · 14-03-2017

2 x M4 on the small ones, flats on the shaft and flattened bits of copper (Clive's tip) under the grubscrew tip and a single 8mm over the keyway...

Sent from my HUAWEI VNS-L31 using Tapatalk

**JoeHarris** · 14-03-2017

Originally Posted by njhussey

2 x M4 on the small ones, flats on the shaft and flattened bits of copper (Clive's tip) under the grubscrew tip and a single 8mm over the keyway...

Sent from my HUAWEI VNS-L31 using Tapatalk

Nice one -