Quote Originally Posted by JoeHarris View Post
It's a new addition because I have a 12v pump but not a big deal - a 24v pump will be cheap enough in the scheme of things! You are right about the VFD switching the pump on so guess being able to switch manually on the mcb will not be all that useful.

How about this one: https://www.ebay.co.uk/itm/172219861161
Ah, ok thought was unusual for me to miss something obvious like that.!

Yep, that pump will be fine.

Regards the MCB then don't really need MCB but the suitable fuse is required to be safe but only in case of short it's not something you'll use has a switch.
The VFD Relay will handle this for you and because you'll only ever run the pump when the spindle is spinning you'll have no need to manual overide.