Thread: 3 Axis CNC router
Hybrid View
-
19-05-2017 #1
Last Activity: 4 Weeks Ago
It is a signal converter, 0-10volts to 4-20mA.
hvac stuff.
Verstuurd vanaf mijn SM-A320FL met Tapatalk
-
20-05-2017 #2
Last Activity: 2 Days Ago
Good work on the mock up Joe. I did mine the other way around with the on /off immediately after the 24V psu. This was my master control. Then the reset to switch the relay/pilz which switched the contractor. If you have an estop event you are then just jumping between estop switch and reset rather than having an on off in there as well. Both ways work just felt like a better operation flow
-
The Following User Says Thank You to routercnc For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 15 users browsing this thread. (0 members and 15 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
3 axis cnc/router bed
By dudz in forum Marketplace DiscussionReplies: 23Last Post: 28-12-2012, 09:38 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks